iphone 6 screen lights up but no picture

#Iphone 6 screen lights up but no picture software#
#Iphone 6 screen lights up but no picture tv#

When the sound from your TV is still present but there is no picture, the backlight system fault will in the vast majority of cases be the source of the problem. Here are the different causes that can be the source of the problem: Backlight problem In this case, the repair will be much more tedious and will require skills in electronics. Unfortunately, if the above checks and operations did not give any results, it is very likely that your Philips TV turns on but the screen remains black due to a component problem. If your TV is under warranty, do not carry out any manipulations and call the Philips support service. Before each manipulation, switch off the power by unplugging your TV from the mains socket. Check that the cables are not damaged, that is to say that they are not burnt, melted, deformed or damaged. Then check that the cables are correctly connected to the TV, decoder, box and wall outlet. When your Philips TV turns on but the screen remains black, the problem can also be caused by bad connections.

#Iphone 6 screen lights up but no picture software#

If the menu appears, verify that your TV has downloaded the latest software update. Try to display the setup menu of your Philips TV.Most certainly more particularly from a connection fault between the television and the connected device (HDMI cable, decoder, box, etc.). If the image appears with another source, the problem therefore comes from a particular source.If it still doesn't work, try it out with another device. Also check that the peripheral device is turned on and connected.

If the problem occurs only with an external source, check that the connections are correctly made.

Check that the antenna is properly connected to the TV TV. If it is DTT, carry out a new channel setting.

In case you are on the TV source, make sure the connection is good and that you are receiving the channels.To check this, try all the sources on your TV. Secondly, it may be that one of your TV sources is the problem.To do this, click on the “Source” button on your remote control and choose the source of your choice. Then check that you are connected to the correct source. At first, it may happen that you do not have not selected the correct image reception source.It will then be necessary to carry out some checks to rule out this hypothesis or solve the problem: The image of your Philips TV is bad or your screen remains black even though the device is switched on? The origin of the problem can also be source. Note: If your Philips TV has sound but no picture, go directly to 2 part of our article 'Component problem'. Then continue the troubleshooting step by step. If your Philips TV turns on but the screen is still black, the procedure did not work. If the problem returns, then you will need to proceed to the next steps in our troubleshooting. However, continue to monitor the operating status of the device. If your TV turns on again and the picture appears, the procedure worked. Unplug your Philips TV cord from the wall outlet as well as all peripheral devices connected to the TV.If this method did not work, go to electrical reset by proceeding in this way: A resetting your TV will then be necessary to delete it.įirst, if you have a TV decoder and / or a box, try to use them redémarrer with the On / Off button located on the back of both devices. When your Philips TV turns on but the screen remains black, it may be that a bug or minor malfunction either at the source of the problem.